This misting cauldron is great for adding a motion to any scene. Simply place the mister in the cauldron with regular tap water and create a spooky effect at table centerpieces at Halloween parties, haunted houses and other decorative displays. Includes 7" tall cauldron, mister unit with lights, UL adaptor and plastic mat.

Mist maker instructions For initial use,be sure the input voltage marked on the transformer must be same as your local power supply. If not, please do not use it until get a correct transformer from your local distributor. Place the MIST MAKER into a water container placidly, and pour into enough clean water.If the water is not enough to submerge the water-lever sensor switch, it can not generate mist;But if the water depth is too high,the mist is small or even no mist generated. Please refer to the following drawing No.2 for the best water lever. The MIST MAKER shall generate calori when it is working,the water temperature shall be rising,recommend to use it in a big volume or a good radiating water container. Place the transformer in a drafty place,and far away moist place. Connect the MIST MAKER with the transformer properly. Plug the transformer into power supply and electrify,if it is correctly installed, it will start to work immediately. PARAMETER Limited temperature:5~40 C Water rate:>350mL/H Depth of water limited :45~65mm Rate voltage :15W Products include: 1*mist maker 1*Waterproof frame 1*power Click on the shopping cart to make a purchase, make your Halloween differen... [Read More]

Specification: Material: ABS plastic Aerosolized amount:≥300mL/H 12 changing LED light. Input: 110-240V, 50/60Hz(With a US AC/DC adapter) Output: DC 24V, 700mA Disc: 1.8inch. Mist Maker Size: 1.8inch diameter, 1.8inch tall Cable Length: 210 cm (82 inch) (90cm attach to adapter, 120cm attach to mist maker) , 3.5mm in diameter How to Use: 1. DO NOT touch the atomizing slice while the Mist Maker is working. 2. Please SWITCH OFF the power before any movement or maintenance. 3. Keep the nozzle 2-3CM under the water level to get the best atomization effect. 4. Ensure the water is in high quality, use clean tap water.(not work for the distilled water) 5. The atomizing slice is consumable, and its service life is≥3000 hours. If the mist decreases, please clean the atomizing slice with a cotton swab(no need to use any detergent).Always keep it clean. Package included : 1 x Mist maker 1X removable splash guard 1 x AC-DC adapter (US plug)

Description : Disc: 1.5cm. Output Voltage: 24V DC. With a US AC/DC adapter. Input: 110-250V, 50/60Hz Output: DC 24V, 700mA Cable Length: 210 cm (82 inch) (90cm attach to adapter, 120cm attach to mist maker), 3.5mm in diameter Package included : 1 x Mist maker 1 x AC-DC adapter (US plug) Points for attention: 1. Do not turn over the Mist Maker When the switch is turned on,keep upright,or it may damage the atomizer. 2.Please ensure that the daily running time is less than 10 hours, otherwise the life of atomizing slice will be shorted. 3. Don't touch the atomizing slice while the Mist Maker is working. 4. Ensure the water at high quality, use clean tap water.(water quality deterioration may influence the lifetime) 5. Please switch off the power before Movement or maintenance. 6. The atomizing slice is consumable,and its service life is¡Ý3000 hours.If marked reduction of Mist present, please clean atomizing slice with a cotton swab(don't need to use any detergent).Keep it clean. Note: The product of the nozzles upper part, the water injection mouth more than 2-3 cm best, not less than nozzles, also cannot too higher than nozzles

Description: Brand new and high quality. No heat or chemicals needed. Easy to operate, put it into the water, then the mist appears. Ideal for indoor or outdoor fountains, water feature, and office use. With 12 LED (4 red 4 yellow 4 blue) light, different color group LEDs lighting up alternately. Mist Maker Size: 4.6 cm diameter, 27.5cm tall. Disc: 1.5cm. Cable Length: 210 cm (82 inch) (90cm attach to adapter, 120cm attach to mist maker) , 3.5mm in diameter. With a US AC/DC adapter . Input: 110-250V, 50/60Hz Output: DC 17V, 800mA Points for attention: 1. Do not turn over the Mist Maker When the switch is turned on,keep upright,or it may damage the atomizer. 2.Please ensure that the daily running time is less than 10 hours, otherwise the life of atomizing slice will be shorted. 3. Don't touch the atomizing slice while the Mist Maker is working. 4. Ensure the water at high quality, use clean tap water.(water quality deterioration may influence the lifetime) 5. Please switch off the power before Movement or maintenance. 6. The atomizing slice is consumable,and its service life is 3000 hours.If marked reduction of Mist present, please clean atomizing slice with a cotton swab... [Read More]

Features:The Mist Maker has 12 LEDs which cycle through different colours,combined with the mist effect creates a stunning display! Operate on a safe 24V system for a plug in mains adaptor.Add water,Just plug in and mist will instantly appear. The water is not heated, They have a low water level sensor to switch the unit off if the water level becomes too low.Bring your Halloween party to life and create a creepy atmospheres with this Cauldron Mist Making.Specification:Input Voltage: 110-240V 50/60HzInput Power: 24WMax Evaporation: 350ml/HSize: 44.5 x 42.5mmColor: As the picture showUsing Temperature: 1-45 degCIncluded:1 x Mist Making Machine with Adapter

This 12 LED mist maker can add a stunning mist effect to your pond or water tank to filter the bad smell with electro and ultrasonic technology.You can put it in your pond, rockery,fishtank,vase, birdbath, etc.than it will create a magical atmosphere. Points for attention: 1. Do not turn over the Mist Maker When the switch is turned on,keep upright,or it may damage the atomizer. 2.Please ensure that the daily running time is less than 10 hours, otherwise the life of atomizing slice will be shorted. 3. Don't touch the atomizing slice while the Mist Maker is working. 4. Ensure the water at high quality, use clean tap water.(water quality deterioration may influence the lifetime) 5. Please switch off the power before Movement or maintenance. 6. The atomizing slice is consumable,and its service life is=3000 hours.If marked reduction of Mist present, please clean atomizing slice with a cotton swab(don't need to use any detergent).Keep it clean. Package included: 1 x Mist maker 1 x AC-DC adapter (US plug) Note: The product of the nozzles upper part, the water injection mouth more than 2-3 cm best, not less than nozzles, also cannot too higher than nozzles Please do not use pure wate... [Read More]

Mist maker instructions For initial use,be sure the input voltage marked on the transformer must be same as your local power supply. If not, please do not use it until get a correct transformer from your local distributor. Place the MIST MAKER into a water container placidly, and pour into enough clean water.If the water is not enough to submerge the water-lever sensor switch, it can not generate mist;But if the water depth is too high,the mist is small or even no mist generated. Please refer to the following drawing No.2 for the best water lever. The MIST MAKER shall generate calori when it is working,the water temperature shall be rising,recommend to use it in a big volume or a good radiating water container. Place the transformer in a drafty place,and far away moist place. Connect the MIST MAKER with the transformer properly. Plug the transformer into power supply and electrify,if it is correctly installed, it will start to work immediately. PARAMETER Limited temperature:5~40 C Water rate:>350mL/H Depth of water limited :45~65mm Rate voltage :15W Products include: 1*mist maker 1*Waterproof frame 1*power Click on the shopping cart to make a purchase, make your Halloween differen... [Read More]

Description: Mist Maker Size: 3.5 cm diameter, 4cm tall. Disc: 1.6cm. Output Voltage: 24V DC. With a US AC/DC adapter . Input: 110-250V, 50/60Hz Output: DC 24V, 700mA Cable Length: 210 cm (82 inch) (90cm attach to adapter, 120cm attach to mist maker) , 3.5mm in diameter. Package included : 1 x Mist maker 1 x AC-DC adapter (US plug) Points for attention: 1. Do not turn over the Mist Maker When the switch is turned on, keep upright, or it may damage the atomizer. 2.Please ensure that the daily running time is less than 10 hours, otherwise the life of atomizing slice will be shorted. 3. Don't touch the atomizing slice while the Mist Maker is working. 4. Ensure the water at high quality, use clean tap water.(water quality deterioration may influence the lifetime) 5. Please switch off the power before Movement or maintenance. 6. The atomizing slice is consumable,and its service life is≥3000 hours.If marked reduction of Mist present, please clean atomizing slice with a cotton swab(don't need to use any detergent).Keep it clean. Note: The product of the nozzles upper part, the water injection mouth more than 2-3 cm best, not less than nozzles, also cannot too higher ... [Read More]

Specifications: 1. Mist Maker Size: 4.6 cm diameter, 4.2cm tall 2. Material:aluminum 3. Aerosolized amount:≥400mL/H 4. Disc: 1.5cm. 5. Output Voltage: 24V DC. 6. With a US AC/DC adapter 7. Input: 110-250V, 50/60Hz 8. Output: DC 24V, 700mA 9. Cable Length: 210 cm (82 inch) (90cm attach to adapter, 120cm attach to mist maker) , 3.5mm in diameter Points for attention: 1. Do not turn over the Mist Maker When the switch is turned on,keep upright,or it may damage the atomizer. 2. Please ensure that the daily running time is less than 10 hours, otherwise the life of atomizing slice will be shorted. 3. Don't touch the atomizing slice while the Mist Maker is working. 4. Ensure the water at high quality, use clean tap water.(water quality deterioration may influence the lifetime) 5. Please switch off the power before Movement or maintenance. 6. The atomizing slice is consumable,and its service life is ≥3000 hours.If marked reduction of Mist present, please clean atomizing slice with a cotton swab(don't need to use any detergent).Keep it clean. Note: 1.The product of the nozzles upper part, the water injection mouth more than 2-3 cm best, not less than nozzles, also cannot to... [Read More]

Create a joyful environment with this portable bubble machine. Ideal for indoor and outdoor activities, this blaster is sure to liven up any stage production, wedding, kids birthday party, and so much more! Take it anywhere, as its compact, lightweight design and adjustable handle allow for effortless transportation. Designed to perform 18-22 rotations per minute, this machine will turn the room into a bubbly heaven. FEATURES: Designed with a durable metal caseIdeal for indoor and outdoor activitiesPerfect for kid parties, weddings, and moreLightweight with an adjustable handleCompact and easy to maintainQuiet motor easily refills and turns on or off18-22 rotations

Video of R700: The Rockville R700 fog machine is a beast of a machine! This machine is around the same size as the Chauvet H700 machine and the American DJ VF400 machine. We feel ours is better for many reasons. We include both a wired remote control as well as a wireless timer remote. The wireless timer remote is going to be your best friend! You can hit a single button and the machine will disperse fog for 30 seconds. The fog will stay in the air for a while; and every now and then you can hit the timer

The Hurricane Series Foggers provide the quality, performance and innovation for which Chauvet is known. All come with generous-capacity tanks and quick heat up of water-based fog to fill a venue within