These appliances are made of Foam Latex. Most commonly adhered with Pros Aide, Spirit Gum, and/or Medical Adhesive. Most commonly removed with any oil based adhesive remover. Must be sealed with either Pros Aide or Pax Paint before applying alcohol based makeup to appliance. Blend edges of appliances with 99% Alcohol. Bondo can be used if necessary to help blend edges. Rubber Wear foam latex prosthetics are lovingly designed by third generation special effects make-up artist Rob Burman with the needs of you, the professional make-up artist in mind. Rubber Wear prosthetics have been carefully sculpted, textured like skin and the edges are tissue thin for invisible blending. The foam is run at a high speed to create a fluffy latex prosthetic that looks, feels and moves naturally with the body or face, yet is strong enough to last an entire shooting day. Great for novices and make-up students too! Whether you are a multi-Academy award winning make up artist, budding YouTube film-maker or just looking to surprise your friends at your next party, Rubber Wear brings the character to whatever your project with the thinnest edges and easy application.

16 oz Pint of Liquid Latex by Kangaroo

Liquid Latex is used to create unusual skin textures or to apply Crepe Hair and prosthetics. Available in a variety of colors and sizes. Easy to use and create incredible effects - simply brush on a thin layer of Liquid Latex to the desired area and allow to dry. To create textures, use flaked cereal, cotton, tissue, etc. and apply Liquid Latex on top. To create a scar or wrinkled effect, build up thin layers of Liquid Latex. Liquid Latex is easy to clean and requires no remover - simply peel cured latex from skin.How to Use:Brush on a thin layer of Liquid Latex to the desired area and allow to dry. To create textures, use flaked cereal, cotton, tissue, etc. and apply Liquid Latex on top. Repeat if necessary. To create a scar or wrinkled effect, build up thin layers of Liquid Latex. Liquid Latex requires no remover, simply peel cured latex from skin. Makeup remover will soften dry latex but will not dissolve it. Avoid getting latex into hair or on clothes. To protect sensitive skin, use Barrier Spray under latex. Remove by gently peeling from skin followed by soap and water.The Mehron Story:Mehron Makeup has been the leader in professional makeup for over 90 years. Our products are... [Read More]

If you need to look ghoulish, become a zombie, or appear as if you’ve been chomped on by the walking dead, then look no further. This all-natural liquid latex makeup can be used to create all of these effects and more. You’re only limited by your imagination! Need a bruised eye? No problem! Need to age 50 years for the evening? We’ve got you covered—literally. This professional-grade liquid latex is perfect for making an unforgettable costume for Halloween or a costume party. Give it a try. It’s easier than you think, and more fun than you ever thought possible.

These appliances are made of Foam Latex. Most commonly adhered with Pros Aide, Spirit Gum, and/or Medical Adhesive. Most commonly removed with any oil based adhesive remover. Must be sealed with either Pros Aide or Pax Paint before applying alcohol based makeup to appliance. Blend edges of appliances with 99% Alcohol. Bondo can be used if necessary to help blend edges. Rubber Wear foam latex prosthetics are lovingly designed by third generation special effects make-up artist Rob Burman with the needs of you, the professional make-up artist in mind. Rubber Wear prosthetics have been carefully sculpted, textured like skin and the edges are tissue thin for invisible blending. The foam is run at a high speed to create a fluffy latex prosthetic that looks, feels and moves naturally with the body or face, yet is strong enough to last an entire shooting day. Great for novices and make-up students too! Whether you are a multi-Academy award winning make up artist, budding YouTube film-maker or just looking to surprise your friends at your next party, Rubber Wear brings the character to whatever your project with the thinnest edges and easy application.

These appliances are made of Foam Latex. Most commonly adhered with Pros Aide, Spirit Gum, and/or Medical Adhesive. Most commonly removed with any oil based adhesive remover. Must be sealed with either Pros Aide or Pax Paint before applying alcohol based makeup to appliance. Blend edges of appliances with 99% Alcohol. Bondo can be used if necessary to help blend edges. Rubber Wear foam latex prosthetics are lovingly designed by third generation special effects make-up artist Rob Burman with the needs of you, the professional make-up artist in mind. Rubber Wear prosthetics have been carefully sculpted, textured like skin and the edges are tissue thin for invisible blending. The foam is run at a high speed to create a fluffy latex prosthetic that looks, feels and moves naturally with the body or face, yet is strong enough to last an entire shooting day. Great for novices and make-up students too! Whether you are a multi-Academy award winning make up artist, budding YouTube film-maker or just looking to surprise your friends at your next party, Rubber Wear brings the character to whatever your project with the thinnest edges and easy application.

These appliances are made of Foam Latex. Most commonly adhered with Pros Aide, Spirit Gum, and/or Medical Adhesive. Most commonly removed with any oil based adhesive remover. Must be sealed with either Pros Aide or Pax Paint before applying alcohol based makeup to appliance. Blend edges of appliances with 99% Alcohol. Bondo can be used if necessary to help blend edges. Rubber Wear foam latex prosthetics are lovingly designed by third generation special effects make-up artist Rob Burman with the needs of you, the professional make-up artist in mind. Rubber Wear prosthetics have been carefully sculpted, textured like skin and the edges are tissue thin for invisible blending. The foam is run at a high speed to create a fluffy latex prosthetic that looks, feels and moves naturally with the body or face, yet is strong enough to last an entire shooting day. Great for novices and make-up students too! Whether you are a multi-Academy award winning make up artist, budding YouTube film-maker or just looking to surprise your friends at your next party, Rubber Wear brings the character to whatever your project with the thinnest edges and easy application.

These appliances are made of Foam Latex. Most commonly adhered with Pros Aide, Spirit Gum, and/or Medical Adhesive. Most commonly removed with any oil based adhesive remover. Must be sealed with either Pros Aide or Pax Paint before applying alcohol based makeup to appliance. Blend edges of appliances with 99% Alcohol. Bondo can be used if necessary to help blend edges. Rubber Wear foam latex prosthetics are lovingly designed by third generation special effects make-up artist Rob Burman with the needs of you, the professional make-up artist in mind. Rubber Wear prosthetics have been carefully sculpted, textured like skin and the edges are tissue thin for invisible blending. The foam is run at a high speed to create a fluffy latex prosthetic that looks, feels and moves naturally with the body or face, yet is strong enough to last an entire shooting day. Great for novices and make-up students too! Whether you are a multi-Academy award winning make up artist, budding YouTube film-maker or just looking to surprise your friends at your next party, Rubber Wear brings the character to whatever your project with the thinnest edges and easy application.

Skin of wax can cover the eyebrows, can create scratches, cuts, wounds, etc. Design for fake wound scar to achieve like true surface, great trick to astonish and scare your friends. Suitable for Fun Themed Party, Fancy Dress, Halloween, Carnivals, Festival or Any Special Effect Makeup Art. Package Included: 1 x Oil 1 x Spirit Gum Adhesive 1 x Spatula Tool 1 x Makeup Wax 1 x Coagulated Blood Steps to use: 1) Use alcohol to clean up you skin ,and wait until it dries. Dab Spirit Gum directly to clean dry skin with brush or fingers directly.2) Soften a small amount of wax with the warmth from your hands. 3) Use spatula tool to daub skin wax in the skin, blend edges into the skin. 4) After daub skin wax ,use a little oil to ake the skin tight combination. 5) You can use facial foundation to decorate the skin if it's different of your skin. 6) Apply your make-up/blood/whatever. Note: - It becomes very soft and pliable when warmed by body heat. - Color may very slightly due to the color calibration of each individual monitor. - It only can be used as makeup, please do not take it in other use. - 100% Vegan product, never tested on animals.

Over his 50-year career, Maurice Stein's Academy Award-winning (Planet of the Apes, 1969) makeup artistry has touched the faces of some of the brightest stars of film, television, and commercials-even three US presidents. He has worked on over 200 films and television shows and has more than 4,000 commercials to his credit

Prosthetic Alien Full Face

This Frankenstein Bolts kit will have you looking like the classic horror monster. Pop on these latex bolts and get your best monster walk going.- includes (2) 1" bolts- spirit gum and other makeup not

If you need to look ghoulish, become a zombie, or appear as if you’ve been chomped on by the walking dead, then look no further. This all-natural liquid latex makeup can be used to create all of these effects and more. You’re only limited by your imagination! Need a bruised eye? No problem! Need to age 50 years for the evening? We’ve got you covered—literally. This professional-grade liquid latex is perfect for making an unforgettable costume for Halloween or a costume party. Give it a try. It’s easier than you think, and more fun than you ever thought