These real size self-adhesive beard with mustache and eyebrows are handmade. They are attached by means of a specific 3M medical plaster (on the back side of beard with mustache and eyebrows). This anti-allergic plaster does not irritate the skin, is easily stuck and removed. If necessary beard, mustache and eyebrows may be cut, combed, or shaped by wet hands or simply by hair spray. If you want to apply the beard several times, use new medical plaster or two-sided sticky tape.

How to use the beard : 1. beard shaved clean after a good face 2. beard excess gauze cut, you can also trim shape according to their own preferences (our products are suitable for most people face, generally do not need pruning). Note, make sure beard is right for you, because the beard trimmed once, will not be at risk for return! 3. This simulation is the use of human hair knotted beard process, it can not be too short at the time of pruning, tying parts too close, otherwise it will cause the hair can not be fixed in the yarn online, resulting in hair loss. 4. Place the trimmed beard on his face after a good positioning. 5. beard gauze surface coated with suitable glue, more easily open plastanti-white; also be directly shot with your fingers on the skin, a small amount can, wait 3-5 minutes, have brushed like glue. 6. The first and paste it in the middle, good paste on both sides, both sides highly consistent attention. 7. Use a damp gauze pad or stockings finger firmly pressed down for about one minute, so close to the skin glue is not easy to open plastic, and was matte, not anti-white, a higher degree of simulation. 8. glue too much glue or anti-white case, glue cotton swab d... [Read More]

Rubie's costume Company has designed quality costume and fun clothing for decades. Trusted to be the leader of cosplay, Halloween, and general decor items, Rubie's does not sacrifice quality for price. Expect the highest in costume design and material with Rubie's.

How to use the beard : 1. beard shaved clean after a good face 2. beard excess gauze cut, you can also trim shape according to their own preferences (our products are suitable for most people face, generally do not need pruning). Note, make sure beard is right for you, because the beard trimmed once, will not be at risk for return! 3. This simulation is the use of human hair knotted beard process, it can not be too short at the time of pruning, tying parts too close, otherwise it will cause the hair can not be fixed in the yarn online, resulting in hair loss. 4. Place the trimmed beard on his face after a good positioning. 5. beard gauze surface coated with suitable glue, more easily open plastanti-white; also be directly shot with your fingers on the skin, a small amount can, wait 3-5 minutes, have brushed like glue. 6. The first and paste it in the middle, good paste on both sides, both sides highly consistent attention. 7. Use a damp gauze pad or stockings finger firmly pressed down for about one minute, so close to the skin glue is not easy to open plastic, and was matte, not anti-white, a higher degree of simulation. 8. glue too much glue or anti-white case, glue cotton swab d... [Read More]

Beard maintenance: 1. To remove the beard glue yarn online, you can use glue cotton balls dipped in cleaning fluid or 95% medical alcohol, gently press the gauze, moist glue it open, then use the cloth with water sucked glue residue, should not rub Moustache! 2. After prolonged use, the beard hair too much glue stick or gel water, needs cleaning, you can put the right amount of water, mix some of glue cleaning fluid or alcohol soak for 15 minutes, then use the water to wash, dry naturally namely can. 3. beard repeated use, due to the time and remover reason, Hu will bearded former type has changed. Encounter this problem, you can find a small model of the arc with double-sided adhesive beard attached to the top, after the cement with a hair dryer (recommended horsepower small high temperature recommendation 1800w) blowing treatment, while with a fine tooth comb, in accordance with Textures comb blow as it was, or water with a trace of curry stereotypes.

This real size self-adhesive beard is handmade. It is attached by means of a specific medical 3M plaster (on the back side of beard). This anti-allergic plaster does not irritate the skin, is easily stuck and removed. If necessary this beard may be cut, combed, or shaped by wet hands or simply by hair spray. If you want to apply the beard several times, use new medical plaster or two-sided sticky tape.

These real size self-adhesive beard and mustache are handmade. They are attached by means of a specific 3M medical plaster (on the back side of the beard and mustache). This anti-allergic plaster does not irritate the skin, is easily stuck and removed. If necessary beard and mustache may be cut, combed, or shaped by wet hands or simply by hair spray. If you want to apply the beard ad mustache several times, use new medical plaster or two-sided sticky tape.

This top quality hand made beard is comprised of 100% human hair. A perfect choice for theater. This hair piece can be styled and trimmed like normal hair to achieve an ultra-realistic appearance. To Apply: Clean the skin from oils with either soap and water, alcohol, or astringent. Brush on a thin layer of professional Spirit Gum adhesive (included). Allow the Spirit Gum to get tacky, about 20-30 seconds. Press the hair piece onto the adhesive, lacing side should face the skin. Hold in place for a few seconds until well bonded. With careful removal, the theatrical hair piece can be re-used. Spirit Gum can be removed with baby oil on a q-tip.

These real size self-adhesive beard and mustache are handmade. They are attached by means of a specific 3M medical plaster (on the back side of the beard and mustache). This anti-allergic plaster does not irritate the skin, is easily stuck and removed. If necessary beard and mustache may be cut, combed, or shaped by wet hands or simply by hair spray. If you want to apply the beard ad mustache several times, use new medical plaster or two-sided sticky tape.

This real size self-adhesive beard is handmade. It is attached by means of a specific medical 3M plaster (on the back side of beard). This anti-allergic plaster does not irritate the skin, is easily stuck and removed. If necessary this beard may be cut, combed, or shaped by wet hands or simply by hair spray. If you want to apply the beard several times, use new medical plaster or two-sided sticky tape.

OTC Disguise Santa Claus, Wizard, Biker Fake Beard and Mustache Costume, White

US Toy - Fake Pirate Beard Moustache, Multicoloured

1. Material: Synthetic polyester.2. Size: 5.7x3.6x1.2cm/2.24x1.41x0.47in.3. Weight: 16g/0.56oz.Package include: 1 x Fake